Description

General Description

Oolite V5.0 Module is a highly integrated wireless routing module. It is not only a wireless module, it is a complete route, only energized, it can work in a wireless AP/STA module if coupled with 5 network transformers and RJ45 network ports, it is a wireless router.

Oolite V5.0 Module power is 3.3V, and it has 300M wireless transmission rate, two antennas, up to 15 GPIOs,1 USART port,1 RESET pin,1 USB2.0, and 5 Ethernet ports can be defined as input and output.

It’s designed for WiFi hard disk, WiFi router, remote monitoring, remote video, Industrial control DIY, and so on. The module is based on the single chip QCA9531 which integrates an 802.11 b/g/n 2T2R MAC/BB/radio with internal PA and LNA. It supports 802.11n operations up to 150 Mbps for 20 MHz and 300 Mbps for 40 MHz channel respectively, and IEEE 802.11b/g data rates.

Features:

CPU: QCA9531 560Mhz MIPS core

RAM: 64MB DDR2 RAM(128MB optional)

Flash: 16M SPI NOR Flash (8MB/16MB optional)

Wireless: 80211bgn 300Mbps

1 * Mini-Pcie (include USB interface can support 3G/4G Module)

General GPIO: 15 (not including TX, RX)

USB: USB 2.0 master interface, support USB hub extension

Port: 5×100Mbps network interface(1 WAN + 4 LAN)

Antenna: 2 X the built-in PCB/IPX/Ceramic external Antennas.

Debug: The serial debugging interface(UART) has been out.

SPI interface pins out.

Metal shield

ower supply voltage: 3.3V.

Product size: 38.4mm*51.6mm