IPQ4019 V2

2.4GHz Module lEEE802.11 b/g/n | CPU: MT7628DAN

Hardware Description

Description

The Oolite V8.1 module use the MT7621DAT main chipset, and MT7603 2.4Ghz and MT7613 5.8Ghz WiFi chip are connected externally.

The MT7621DAT integrates a dual-core MIPS1004Kc (880MHz), HNAT/HQoS/Samba/VPN accelerators, 5-port GbE switch, RGMII, USB3.0, USB2.0, 3xPCIe, SD-XC. The powerful CPU with rich portfolio is suitable for 802.11ac, LTE cat4/5, edge, hotspot, VPN, AC (Access Control). It can also connect to touch- panel, ZigBee/Z-Wave for Internet Service Router and Home Security Gateway.

MT7603EN is a highly integrated Wi-Fi single chip which supports 300 Mbps PHY rate. It fully complies with IEEE 802.11n and IEEE 802.11b/g standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

The MT7613BEN is a highly integrated single chip which has built in a 2*2 dual-band wireless LAN radio.It supports IEEE802.11ac draft standard and provides the highest PHY rate up to 867Mbps,offering feature-rich wireless connectivity and reliable throughput from an extended distance.

For the next generation router, MT7621DA provides several dedicated hardware engines to accelerate the NAT, QoS, Samba and VPN traffic. These accelerators relief the CPU for other upper layer applications.111

 

Hardware Spec

Dual Frequency Module 2.4GHz & 5.8GHz IEEE802.11 b/g/n/a/ac
WLAN Chip: MT7621DAT + MT7603BEN + MT7613BEN
Double side compoments and stamp hole pins
1.2Gbps Wireless rate
RAM: Embedded DDR3-1200 128MBytes (KGD)
Flash: 16MB (32MB / 64MB optional)
5-port 10 / 100 / 1000Mbps SW/PHY
Support 802.11b/g/n 2T2R 2.4Ghz 300Mbps, 802.11ac 2T2R 5.8Ghz 867Mbps
SPI, NAND Flash, SDXC, eMMC (4 bits)
1 x USB 3.0, 1 x USB 2.0, 1 x PCIe host, I2C, SPI × 2, UART lite × 3, JTAG, MDC, MDIO, GPIOs
2 × 2.4GHz IPEX external antenna (default) or use the stamp hole pins interface
2 × 5GHz IPEX external antenna (default) or use the stamp hole pins interface
3.3V Power supply voltage
Size: 50mm x 50mm

Hardware interface

Pins Descroption

Hardware Display

Reviews

There are no reviews yet.

Be the first to review “IPQ4019 V2”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Hardware spec

Chip
IPQ4019
SPI Nor Flash
default 16MByte (32MByte/64MByte optional)
RAM:
default 512MByte DDR3(256MByte/1GB optional)
Parallel Nand Flash
None by default (128MByte / 256MByte optional)
Size
75mm x 75mm x 9.5mm
Support
23.05 OpenWrt / Linux 5.15 SDK

Product Gallery

Hardware Display