Description
Oolite V2 is a highly integrated wireless routing module. It is not only a wireless module, it is a complete route, only energized, it can work in a wireless AP module, if coupled with a network transformer and RJ45 network port, she is a wireless router. Oolite V2 power is very low, working alone, only 0.36W, very suitable for battery products, it has a 150M wireless transmission rate, up to 22 GPIOs, and 5 Ethernet port can be defined as input and output. It’s design for WiFi hard disk, WiFi router, remote monitoring, remote video, Industrial control DIY and so on. The module based on the single chip AR9331 which integrates an 802.11n 1×1 MAC/BB/radio with internal PA and LNA. It supports 802.11n operations up to 72 Mbps for 20 MHz and 150 Mbps for 40MHz channel respectively, and IEEE 802.11b/g data rates.
Hardware spec
| CPU: AR9331 400MHz MIPS core |
| RAM: 64MByte DDR2 RAM |
| Flash: 16MByte SPI NOR Flash memory (4/8MByte options available) |
| Wireless Speed: 150Mbps |
| General GPIO: 22 (excluding TX, RX) |
| UART: High-speed UART for console support |
| USB: USB 2.0 master interface, supports USB hub extension |
| Power Supply Voltage: 3.3V |
| Port: 5 × 100Mbps network interface |
| Antenna: the built-in IPX external antenna. |
| Debug: serial debugging interface has beenout. |
| Board Power: 0.36W |
| Product size: 22.0×35.1mm |
| SPI interface pin out. |
Hardware interface
Pins Descroption
Pins Descroption
Hardware Display
Reviews
There are no reviews yet.