Product
Oolite-V2.0 WiFi Module with AR9331(5FE) is a highly integrated wireless routing module. It is not only a wireless module, it is a complete route, only energized, it can work in a wireless AP module, and if coupled with a network transformer and RJ45 network port, it is a wireless router.
Oolite-V2.0 WiFi Module with AR9331(5FE) is a highly integrated wireless routing module. It is not only a wireless module, it is a complete route, only energized, it can work in a wireless AP module, and if coupled with a network transformer and RJ45 network port, it is a wireless router.
Oolite-9331(5FE) power is very low, working alone, only 0.36W, very suitable for battery products, it has a 150M wireless transmission rate, up to 22 GPIOs, and 5 Ethernet ports can be defined as input and output.
It's designed for WiFi hard disk, WiFi router, remote monitoring, remote video, Industrial control DIY, and so on.
The module is based on the single chip AR9331 which integrates an 802.11n 1x1 MAC/BB/radio with internal PA and LNA. It supports 802.11n operations up to 72 Mbps for 20 MHz and 150 Mbps for 40 MHz channel respectively, and IEEE 802.11b/g data rates.
Characteristics:
CPU: AR9331 400MHZ MIPS core
RAM: 64MByte DDR2 RAM
Flash: 16MByte SPI NOR Flash memory(4/8MByte option)
Wireless speed: 150Mbps
General GPIO: 22 (not including TX, RX)
High-speed UART for console support
USB: USB 2.0 master interface, support USB hub extension Power supply voltage: 3.3V.
Port: 5×100Mbps network interface
Antenna: The built-in IPX external antenna.
Debug: the serial debugging interface has been out.
Board Power: 0.36W
Product size: 22.0* 35.1MM
SPI interface pins out.
Maecenas malesuada elit lectus felis, malesuada ultricies. Curabitur et ligula. Ut molesie a, ultricies porta urna.Maecenas malesuada elit lectus felis, malesuada ultricies. Curabitur et ligula. Ut molesie a, ultricies porta urna.
