Description
Oolite-MT7987A V1 Module is a mature MediaTek Filogic commercial discrete Wi-Fi 7 chipset, composed of the MT7987A network main processor, MT7990AN Wi-Fi 7 baseband chip, and MT7976C integrated dual-band RF front-end. Positioned as a BE3600 dual-band Wi-Fi 7 solution, it supports the development of multiple product types, including premium home routers, commercial ceiling APs, industrial gateways, 5G CPEs, and open-source development routers.
MT7987A (System Main Processor)
The MediaTek MT7987A is a world-leading network processing platform designed to deliver high-performance and reliable networking experiences in both wired and wireless applications. The MT7987A integrates a rich set of connectivity interfaces, including 1 × 2.5 Gigabit Ethernet port, 2 × HSGMII/SGMII interfaces, 1 × PCIe 3.0 2L/1+1L interface, and 1 × USB 3.2 Gen1 port plus 1 × USB 2.0 port. The USB 3.2 interface shares resources with one HSGMII/SGMII interface, and only one can be active at a time. The MT7987A further enables seamless Wi-Fi 7 connectivity through its dedicated Wi-Fi 7 companion chip.
MT7990AN (Wi-Fi 7 Baseband Chip)
Standard BE3600 throughput specification: 574Mbps for 2.4GHz 2×2 MIMO plus 2882Mbps for 5GHz 2×2 MIMO with 160MHz channel bandwidth. It fully supports Wi-Fi7 features including MLO multi-link aggregation, 4096QAM, MRU, uplink/downlink OFDMA and MU-MIMO. Characterized by low latency and high client capacity, it is ideal for cloud gaming, 8K video streaming and whole-home Mesh networking.
MT7976C (Integrated FEM RF Front-End)
A single-chip solution integrating PA (Power Amplifier), LNA (Low Noise Amplifier) and TRSW (Transmit/Receive Switch) for both 2.4 GHz and 5 GHz bands, simplifying PCB routing and mitigating RF interference. It boasts excellent transmit/receive sensitivity and consistent output power, facilitating streamlined mass RF calibration while effectively improving wall penetration and long-distance reception performance.
Hardware spec
| MT7987A Quad-core Cortex-A53 @ 2.0 GHz, 64-bit |
| RAM: default 512MByte (1GB/2GB/4GB optional) |
| SPI Nor Flash: default 32MByte(16MByte/64MByte optional) |
| Support SPI NAND Flash (128MByte / 256MByte / 256MByte) optional |
| Support eMMC(4GB/8GB/64GB) optional Nand Flash and eMMc can only choose one |
| 2.4GHz(40MHz, 4096-QAM) + 3T3R(160MHz, 4096-QAM) WiFi7 BE3600 ( Total 3*IPEX ，Two dual -frequency antennas，one 2.4GHz antennas) Integrated PA, LNA and TR-SW 20/40/80/160MHz bandwidth Support up to 4096 QAM |
| 1-port 10/100/1000Mbps/2.5Gbps ethernet( Integrate 2.5G PHY) |
| 1-port 10/100/1000/2.5Gbps HSGMII |
| 1 x USB 3.0 |
| GPIOs |
| Support JTAG interface |
| OpenWrt / Linux SDK |
| Power supply voltage: 12V/1.5A or 5V/3A |
| Size: 85.0mmx65.0mmx10.0mm |
Hardware interface
Optional Functional table
| Development Board Functional choose table | ||||
| POE | Halow WiFi | Zigbee/BLE | ESIM | TF Card |
| Without (default) | 700MHz | Not included by default |
Not included by default |
Not included by default |
| 868MHz | ||||
| 900MHz | ||||
| Without (default) | ||||
| Module Optional Configuration table | ||||
| RAM (DDR4) | SPI Nor Flash (default no nor flash) |
SPI NAND Flash or eMMC (Only one can be selected) |
||
| 512MB (default) | 16MB | NAND Flash: 128MB | ||
| 1GB | 32MB (default) | NAND Flash: 256MB | ||
| 64MB | eMMC: 4GB / 8GB / 16GB / 64GB etc. | |||
| Flash common configuration choose 1. NAND Flash: Start system from SPI Nor Flash (default 32MB) 2. eMMC: Start system from eMMC 3. NOR Flash: Start system from NOR Flash 4. NOR Flash + eMMC: NOR as boot, eMMC as storage |
||||
| Development Board Optional Accessory Table | ||||
| Package | 12/2A (US adapter) | 3 × dual band 5dBi Antenna | Carton + Pearl Cotton | |
| 12/2A (EU adapter) | ||||
| 12/2A (CN adapter) | ||||
Pins Description
Hardware Display
Reviews
There are no reviews yet.